Arduino KY-011 2-color LED module

From

Jump to: navigation, search

WARNING this page is a copy/past of a bad google translation so it might contain errors. If you see a error help us to make it better and log in and change it. Big thanks!

KY-011 2-color LED module 2 color led.PNG

Buy this kit.


3mm red and green LED (common cathode) module

  • Color: Green + Red
  • Diameter: 3mm
  • Case Color: None
  • Package Type: Diffusion
  • Voltage (V) :2.0-2 .5
  • Using a current (MA): 10
  • Viewing angle: 150
  • Wavelength (NM): 571 +644
  • Luminous intensity (MCD) :20-40; 40-80
  • Stent type: long-legged

Our products are widely used in electronic dictionary, PDA, MP3, headphones, digital cameras, VCD, DVD, car audio, communications, computers, Chargers, power amplifier, instrumentation, gifts, electronic toys and mobile phones, and many other fields.

Schematic

  • Arduino pin 10 --> resistor 330 Ohm --> Signal pin of the module
  • Arduino pin 11 --> resistor 330 Ohm --> Middel pin of the module
  • Arduino GND --> module -/GND

Example Code

// Arduino test code for KY011
int redpin = 11; // select the pin for the red LED
int greenpin = 10; // select the pin for the green LED
int val;
void setup () {
   pinMode (redpin, OUTPUT);
   pinMode (greenpin, OUTPUT);
}
void loop () {
   for (val = 255; val> 0; val--)
      {
      analogWrite (greenpin, val);
      analogWrite (redpin, 255-val);
      delay (15);
   }
   for (val = 0; val <255; val++)
      {
      analogWrite (greenpin, val);
      analogWrite (redpin, 255-val);
      delay (15);
   }  
}