Arduino KY-004 Key switch module

From

Jump to: navigation, search

Arduino KY-004 Key switch module Sku 135511.jpg

Buy on dealextreem the sensor or kit


KEYES ARDUINO key switch module

When the key is pressed the buildin LED on pin 13 will be turned off.

Connecting to the Arduino

  • Pin - = GND, connect to GND of the Arduino
  • Pin (middel pin) +5 v, connect to Arduino +5
  • Pin S signal, connect to Arduino pin 10


Example code

int Led = 13 ;// define LED Interface
int buttonpin = 10; // define the key switch sensor interface
int val ;// define numeric variables val
void setup ()
{
  pinMode (Led, OUTPUT); // define LED as output interface
  pinMode (buttonpin, INPUT); // define the key switch sensor output interface
}
void loop ()
{
  val = digitalRead (buttonpin); // digital interface will be assigned a value of 3 to read val
    if (val == HIGH)  // When the key switch when the sensor detects a signal, LED flashes
  {
    digitalWrite (Led, HIGH);
  }
  else
  {
    digitalWrite (Led, LOW);
  }
}